Stainless Steel Baseboard Installation Quality Requirements For
Stainless Steel Skirting Board Line
| Name | stainless steel skirting board, skirting board aluminium, stainless
steel skirting melbourne, 100mm skirting board, stainless steel
skirting bunnings, skirting board profiles, kitchen cabinet
skirting board |
| Material | Stainless Steel |
| Shape | Flat, U-Shape, Round or Customized, L, various shapes |
| Length | 2.5m or 2.7m, can be customized |
| Surface Treatment | Anodized, Polished, Electrophoresis, 8K, Brushed, Electroplate |
| Color | Sliver, Black, Gold, Golden, customized |
| Feature | waterproof, Durable, Water Resistant, Easy clean, Decoration |
| Package | Stick transparent film every piece, 100 pieces in 1 carton |
| Application | Industial, kitchen canbinet, door, Floor, wall |
| Installation Introduce | Using silicone glue / titebond paste to bond with other materials
such as brick, stone, wood, glass. |
Stainless steel baseboard installation quality requirements:
1. The base plate of the stainless steel foot plate should be
nailed to the corners, the surface should be straight, and the
installation should be firm, and there should be no warping or wavy
shapes.
2. Use a pneumatic nail gun to fix the base plate of the stainless
steel foot plate. If the nail cap is used for fixing, the nail cap
must be flattened and driven into the plate by 2-3mm, and no scars
should be left on the surface of the plate when nailing. The top of
the board should be flat. When checking the pull-through line, the
deviation should not be greater than 3mm, and the connection and
rubbing should be smooth, and the error should not be greater than
1mm.
3. Beveled edge pressure rubbing adhesive method should be used for
the joints of the base plate of the stainless steel foot board, and
45° beveled edge flat bonding joints should be made at the exposed
and external corners of the wall, and no overlap is allowed. The
base plate of stainless steel feet must be vertical and consistent
with the floor.
4. The moisture content of the base plate of stainless steel feet
should be controlled according to the natural moisture content of
different regions. Generally, it should not be greater than 18%,
and the difference in moisture content of the wood in the glued
joints should not be greater than 2%.
5. The height difference between the seams and joints of stainless
steel veneer panels is not greater than, the flatness is not
greater than, and the joint width is not greater than 1mm.
